01222
          From Ross-Tech Wiki
          
          
      
      
      
      Table Of Contents
- 
          
          1.
          01222 - Crash Sensor Side Airbag; Passenger Side (G180)
          - 
      
      1.1.1
      01221 - Crash Sensor Side Airbag; Passenger Side (G180): Faulty
      - 1.1.1.2 Possible Symptoms
 - 1.1.2.2 Possible Causes
 - 1.1.3.2 Possible Solutions
 
 - 
      
      1.2.1
      01222 - Crash Sensor Side Airbag; Passenger Side (G180): No or Incorrect Basic Setting / Adaptation
      - 1.2.1.6 Possible Symptoms
 - 1.2.2.6 Possible Causes
 - 1.2.3.6 Possible Solutions
 - 1.2.4.6 Special Notes
 
 
- 
      
      1.1.1
      01221 - Crash Sensor Side Airbag; Passenger Side (G180): Faulty
      
01222 - Crash Sensor Side Airbag; Passenger Side (G180)
01221 - Crash Sensor Side Airbag; Passenger Side (G180): Faulty
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180) faulty
- Crash Sensor Side Airbag; Passenger Side (G180) faulty
- Airbag Control Module (J234) faulty
Possible Solutions
- Check Wiring/Connections between Airbag Control Module (J234) and Crash Sensor Side Airbag; Passenger Side (G180)
- Replace Crash Sensor Side Airbag; Passenger Side (G180)
- Replace Airbag Control Module (J234)
01222 - Crash Sensor Side Airbag; Passenger Side (G180): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Airbag Warning Light ON
Possible Causes
- Wrong Crash Sensor Side Airbag; Passenger Side (G180) installed
Possible Solutions
- Install correct Crash Sensor Side Airbag; Passenger Side (G180)
Special Notes
The Crash Sensors can be checked by using the control module identification and the measuring blocks.
Address 15: Airbags Controller: 1T0 909 605 Component: 05 AIRBAG VW62 0506 2112 Coding: 0012341
The 0506 in this example stands for the required Crash Sensor ID, the first 2 digits (05) apply for the front crash sensors, while the second 2 digits (06) apply for the rear crash sensors. The ID of the currently installed Crash Sensors can be determinded by checking Measuring Value Block (MVB) 009.
 
 
      