01435
From Ross-Tech Wiki
Revision as of 12:48, 10 November 2007 by RtWiKiSyS0p (talk | contribs)
01435 - Brake Pressure Sensor 1 (G201)
01435 - Brake Pressure Sensor 1 (G201): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Basic Setting not performed
Possible Solutions
- Perform Basic Setting
01435 - Brake Pressure Sensor 1 (G201): Electrical Fault in Circuit
Possible Causes
- Brake Pedal Switch (F) faulty/jammed
- Brake Pressure Sensor 1 (G201) faulty
Possible Solutions
- Check/Replace Brake Pedal Switch (F)
- See Measuring Blocks
- Check/Replace Brake Pressure Sensor 1 (G201)
- ABS Hydraulic Unit (N55) may need to replaced
- Perform Brake Pump Bleeding
- Perform Brake Pressure Sensor 1 (G201) Basic Setting
- Replace Brake Electronics Control Module (J104)