17119/P0735/001845
From Ross-Tech Wiki
Revision as of 17:35, 15 December 2006 by RtWiKiSyS0p (talk | contribs)
17119/P0735/001845 - Gear 5: Incorrect Ratio
Possible Symptoms
- Clutch Slipping
- Reduced Power Output
Possible Causes
- Gear related Clutch slipping/faulty
- Gear related Solenoid Valve dirty/faulty
- Overloaded Clutch due to continuous high Torque or Tuning
Possible Solutions
- Check Engine Values for Plausibility, especially Torque related ones.
Special Notes
- The gear monitoring of the transmission control module checks the gear ratio by comparing transmission input and output speed in regard of the currently selected gear. This fault code is being set when recognizing an implausible transmission ratio.