3.0l V6 TDI (BKS/BMK/BUN)

Coding-II

• 10016 = Particle Filter Emergency Regeneration

Special Functions

Particle Filter Emergency Regeneration

Prerequisites:

• Ignition ON
• Engine ON (Idle)
• Oil Temperature above 70 °C (see MVB 007.2)
• Particle Filter Load below 68g (see MVB 104.3)
• Engine Hood CLOSED
• Parking Brake ENGAGED
• Transmission in (P)ARK
• Temperatures at the Exhaust System may rise up to 300 °C!!!
• No Fault Codes Stored
• Power Consumers ON (Light, Seat Heating, Front/Rear Window Heater, Climate Control)

The Regeneration may take up to 40 minutes, the engine speed automatically increases to about 1500 RPM.

[Select]
[01 - Engine]

[Coding-II - 11]

• Start Regeneration by Entering 10016.

[Do It!]

[Meas. Blocks - 08]
Select all 3 Groups at once 100, 101 and 102
[Go!]
MVB 100.1: Engine Speed
MVB 100.3: Regeneration Counter/Timer
MVB 100.4: Regeneration Abort recognized (0 = No Abort/1 = Abort recognized)
MVB 101.4: Regeneration Status (001 = Heating Up, 010 = Regeneration, 100 = Cooling Down)
MVB 102.1: Temperature before Catalyst
MVB 102.2: Temperature before Particle Filter
[Done, Go Back]
[Close Controller, Go Back - 06]