01435

From Ross-Tech Wiki
Revision as of 09:56, 6 December 2006 by RtWiKiSyS0p (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

01435 - Brake Pressure Sensor 1 (G201)

01435 - Brake Pressure Sensor 1 (G201): Electrical Fault in Circuit

Possible Causes

  • Brake Pedal Switch (F) faulty/jammed
  • Brake Pressure Sensor 1 (G201) faulty

Possible Solutions

  • Check/Replace Brake Pedal Switch (F)
    • See Measuring Blocks
  • Check/Replace Brake Pressure Sensor 1 (G201)
    • ABS Hydraulic Unit (N55) may need to replaced
    • Perform Brake Pump Bleeding
    • Perform Brake Pressure Sensor 1 (G201) Basic Setting
    • Replace Brake Electronics Control Module (J104)
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=01435&oldid=3041"