Bentley Continental (3W) Tire Pressure Monitoring
From Ross-Tech Wiki
Revision as of 11:42, 29 April 2009 by RtWiKiSyS0p (talk | contribs) (New page: == Coding == == Special Procedures == === Initialization === '''[Select]'''<br> '''[65 - Tire Pressure Monitoring]'''<br> '''[Security Access - 16]'''<br> Enter 10896, to enable the Ini...)
Coding
Special Procedures
Initialization
[Select]
[65 - Tire Pressure Monitoring]
[Security Access - 16]
Enter 10896, to enable the Initilization.
[Do it!]
[Adaptation - 10]
Adaptation Channel 001
[Read]
Enter 0 as new Value.
[Save]
- Check the Tire Pressure for all 4/5 wheels and if necessary correct it.
Adaptation Channel 004
[Read]
Enter 1 as new Value.
[Save]
[Done, Go Back]
[Measuring Blocks - 08]
Group 019
[Go!]
Check Field 1, it should show the Initialization Status.
[Done, Go Back]
[Close Controller, Go Back - 06]
- Now drive the vehicle until all Wheel Pressure Sensors report plausible Values (either in the Infotainment System or the Instrument Cluster). If the Sensors do not report proper values after a 30 Minute drive there may be a Problem with the Antennas, in such a case you should perform an Antenna Diagnosis.