01435

01435 - Brake Pressure Sensor 1 (G201)

01435 - Brake Pressure Sensor 1 (G201): No or Incorrect Basic Setting / Adaptation

Possible Symptoms

• Malfunction Indicator Light (MIL) active

Possible Causes

• Basic Setting not performed

Possible Solutions

• Perform Basic Setting

01435 - Brake Pressure Sensor 1 (G201): Electrical Fault in Circuit

Possible Causes

• Brake Pedal Switch (F) faulty/jammed
• Brake Pressure Sensor 1 (G201) faulty

Possible Solutions

• Check/Replace Brake Pedal Switch (F)
  • See Measuring Blocks
• Check/Replace Brake Pressure Sensor 1 (G201)
  • ABS Hydraulic Unit (N55) may need to replaced
  • Perform Brake Pump Bleeding
  • Perform Brake Pressure Sensor 1 (G201) Basic Setting
  • Replace Brake Electronics Control Module (J104)

Special Notes

• When found in MK60 ABS/ESP Brake Systems:
  • Check if the Repair Kit documented in TPI 2024465 with the Part Number 1K0-698-517-B is compatible, using the Repair Kit allows to replace the Hydraulic Unit (N55) and the Brake Pressure Sensor 1 (G201) separate from the Control Module which will reduce the Repair Costs.

01435 - Brake Pressure Sensor 1 (G201): Implausible Signal

Possible Symptoms

• Malfunction Indicator Light (MIL) active

Possible Causes

• Brake Pedal Switch (F) faulty/jammed
• Brake Pressure Sensor 1 (G201) faulty

Possible Solutions

• Check/Replace Brake Pedal Switch (F)
  • See Measuring Value Blocks (MVB)
• Check Brake Pressure Sensor 1 (G201)
  • See Measuring Value Blocks (MVB)
• Check/Replace Brake Electronics Control Module (J104) and/or ABS Hydraulic Unit (N55)