Audi A8/S8 (4E)
From Ross-Tech Wiki
Revision as of 09:51, 19 March 2006 by RtWiKiSyS0p (talk | contribs)
Parking Brake
Control Module Basic Setting: Open Rear Parking Brake for Pad Change
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 005
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]
Note: Check/change adaptation channel 006.
Control Module Basic Setting: Open Rear Parking Brake for Repairs
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 007
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]
Control Module Basic Setting: Close Rear Parking Brake
[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 006
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now closing.
[Done, Go Back]