Audi A8/S8 (4E)

Parking Brake

Control Module Basic Setting: Open Rear Parking Brake for Pad Change

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 005
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]

Note: Check/change adaptation channel 006 after changing the pads.

Control Module Basic Setting: Open Rear Parking Brake for Repairs

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 007
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now opening.
[Done, Go Back]

Note: Check/change adaptation channel 006 after changing the pads.

Control Module Basic Setting: Close Rear Parking Brake

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 006
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads are now closing.
[Done, Go Back]

Control Module Adaptation: Pad Thickness

[Select]
[53 - Parking Brake]
[Adaptation - 10]
Channel 006 [Read]
Enter the current thickness of the new pads (Range: 3 - 14 mm).
[Test]
[Save]
[Done, Go Back]