18042/P1634/005684

From Ross-Tech Wiki
Revision as of 13:25, 19 June 2006 by Gerrit Speek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

18042/P1634 - Accelerator Position Sensor 2 (G185): Signal too High

Possible Symptoms

  • Unknown

Possible Causes

  • Wiring and/or connections faulty
  • Sensor (G185) faulty

Possible Solutions

  • Have a look at the Pedal Position Sensor assembly, not the Throttle Body.
  • Check all connections between ECU and accelerator pedal - of course the pedal itself could be defective too.

Special Notes

  • There are 2 sensors in the accelerator pedal, both measure the same except that they are working in opposite directions. This means one counts from 0 to 100, while the other one counts from 100 to 0.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=18042/P1634/005684&oldid=2608"