2.0l TFSI (AXX/BGB/BPJ/BPY/BWA)
From Ross-Tech Wiki
Revision as of 09:08, 30 July 2006 by RtWiKiSyS0p (talk | contribs)
Coding
| Byte 00 | Manufacturer |
|---|---|
| 01 | Audi/Seat |
| 04 | Volkswagen |
| Byte 01 | Model |
| 03 | Audi A3 (8P) / Seat Leon (1P) / VW Golf (1K) |
| 04 | Audi A4 Limousine (8EC) / VW Passat (3C) |
| 05 | Audi A6 Limousine (4F2) |
| 0C | Audi A4 Avant (8ED) |
| 0D | Audi A6 Avant (4F5) |
| 1C | Audi A4 Cabriolet (8H) / VW Eos (1F7) |
| Byte 02 | Market |
| 00 | Europe / Rest of World (RoW) |
| 01 | North America |
| 02 | Russia (GUS) / China |
| 04 | South Africa |
| 08 | Mexico / Taiwan / Korea |
| Byte 03 | Emissions |
| 00 | EU-II |
| 03 | EU-IV |
| 06 | USA LEV |
| 0A | USA ULEV II |
| Byte 04 | Transmission |
| 02 | Automatic Transmission "multotronic" (01J) |
| 18 | 6-Speed Manual Tansmission |
| 19 | Automatic Transmission (09L) |
| 1C | 6-Speed Direct Shift Gearbox (DSG/02E) |
| Byte 05 | Special Functions I |
| 03 | Front-Wheel-Drive (FWD) / Climate Control not equipped |
| 07 | Front-Wheel-Drive (FWD) / Climate Control equipped |
| 0C | All-Wheel-Drive (AWD) / Climate Control not equipped |
| 0F | All-Wheel-Drive (AWD) / Climate Control equipped |
| Byte 06 | Special Functions II |
| 00 | w/o Cruise Control/Suspension Levelling/Trailer |
| 01 | with Cruise Control |
| 02 | with Adaptive Cruise Control (ACC) |
| 04 | with Suspension Levelling |
| 05 | with Suspension Levelling/Cruise Control |
| 06 | with Suspension Levelling/Adaptive Cruise Control (ACC) |
| 08 | with Trailer |
| 09 | with Trailer/Cruise Control |
| 0A | with Trailer/Adaptive Cruise Control (ACC) |
| 0C | with Trailer/Suspension Levelling |
| 0D | with Trailer/Suspension Levelling/Cruise Control |
| 0E | with Trailer/Suspension Levelling/Adaptive Cruise Control (ACC) |
| Byte 07 | Cooling |
| 18 | 1 Cooling Fan |
| 20 | 2 Cooling Fans |
| 60 | 2 Cooling Fans + Additional Water Pump |
Adaptation
Basic Setting
Throttle Body
Kick Down
Fuel Pump
Intake Manifold Runner
Prerequisites:
- Ignition ON
- Engine OFF
- System voltage at least 11.0 V.
[Select]
[01 - Engine]
[Basic Settings - 04]
Group 142
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
Wait until Field 4 shows "ADP. O.K.".
[Done, Go Back]
[Close Controller, Go Back - 06]
- Switch Ignition OFF for at least 60 seconds.
Readiness
[Select]
[01 - Engine]
[Basic Settings - 04]
Group 200
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
Firmly press Brake Pedal and Throttle Pedal (Full Throttle) at once to activate the basic setting.
Field 1 shows the steps counter, which counts down to 0 - then setting readiness is done.
Stay on the pedals as long as the procedure lasts.
[Done, Go Back]
[Close Controller, Go Back - 06]