01044
From Ross-Tech Wiki
Revision as of 05:04, 18 December 2006 by RtWiKiSyS0p (talk | contribs)
01044 - Control Module Incorrectly Coded
Possible Symptoms
- Possibly no symptoms at all
- Possible reduced functionality in certain Control Modules
- Malfunction Indicator Light (MIL) active
Possible Causes
- Incorrect coding in Control Module
Possible Solutions
- Code Control Module correctly.
Special Notes
- DTC 01044 can show up in any Control Module in your car if that Module has a wrong software coding. Write down that software code and check/improve it with the help of Diagnostic_Procedures or http://de.openobd.org/ or http://en.openobd.org/
- Some B5/3B Chassis Passats around MY2000 have a firmware bug which causes this DTC in the 19-CAN Gateway module. Service documents for of those cars indicate that this DTC should be ignored in that module.