Audi A3 (8P) Headlight Aim Control (Xenon Plus)
From Ross-Tech Wiki
Revision as of 21:07, 14 March 2007 by RtWiKiSyS0p (talk | contribs)
Coding
- 0000001 = Audi A3 (8P) Front-Wheel-Drive (FWD)
- 0000002 = Audi A3 (8P) All-Wheel-Drive (AWD)
- 0000003 = Audi A6 (4F) with Steel Suspension
- 0000004 = Audi A6 (4F) with Air Suspension
- 0000005 = Audi A4 (8E)
- 0000006 = Audi A8 (4E)
- 0000007 = Audi Q7 (4L) with Steel Suspension
- 0000008 = Audi Q7 (4L) with Air Suspension
- 0000009 = Audi TT (8J) with Steel Suspension and Front-Wheel-Drive (FWD)
- 0000010 = Audi TT (8J) with Steel Suspension and All-Wheel-Drive (AWD)
- 0000011 = Audi TT (8J) with Magnetic Ride
Adaptation
Basic Setting
Headlight Adjustment
[Select]
[55 - Xenon Range]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
- The meas. block field now shows "Wait" and should switch to "Adjust Headlights" then (this may take up to 10 seconds).
- Adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target.
[ON/OFF/Next]
The adjustment should now be learned.
[Done, Go Back]
Don't forget to check/clear fault codes afterwards.
[Close Controller, Go Back - 06]