Audi Radio Generation II
From Ross-Tech Wiki
Revision as of 18:48, 7 May 2007 by RtWiKiSyS0p (talk | contribs)
Coding
- ?xxxx: Options
- +1 = Front Speaker Diagnosis inactive (ONLY Audi A4 Cabriolet)
- x?xxx: Tone Characteristics (< MY 2001)
- 0 = Linear Tone Characteristics (All Radios)
- x?xxx: Tone Characteristics (MY 2002 >)
- 0 = Tone Characteristics for all other Models and all Radio Chorus
- 1 = Tone Characteristics for A4 (8E)
- 2 = Tone Characteristics for A6 (4B) & Audi A2 (MY 2005 >)
- 3 = Tone Characteristics for A4 Cabriolet (8H)
- 4 = Tone Characteristics for TT (8N)
- 5 = Tone Characteristics for A3 (8L)
- xx?xx: Fader/BOSE/Amplifier
- +1 = Fader-Display OFF
- +2 = BOSE-Display ON
- +4 = Mute Amplifier when using Phone
- 0xxxx?x: Installation Options I
- +1 = Navigation installed
- +2 = Telephone installed
- +4 = Voice Control installed
- 0xxxxx?: Installation Options II
- +1 = Diversity Antenna installed
- +2 = CD-Changer installed
- +4 = Multifunction Steering Wheel installed
NOTE: To Activate the Speed Display, press and hold the MENU button on the radio while turning it on. To deactivate it, cycle power.
Adaptation
Channel 04: Volume
Channel 05: Signal Position
- 0 = Fader Center / Balance Center
- 1 = Fader Front / Balance Left
- 2 = Fader Front / Balance Right
- 3 = Fader Rear / Balance Left
- 4 = Fader Rear / Balance Right
Channel 55: External Tuner
- +1 = Satellite Tuner (SDARS) installed
- +2 = Digital Radio Tuner (DAB) installed
Channel 66: GALA
- 0 = GALA active
- 1 = GALA inactive (or Bose Audio Pilot installed)
Channel 88: Long-Wave Band
- 0 = Long-Wave Band active
- 1 = Long-Wave Band inactive
Channel 99: Transport Mode
- 0 = Transport Mode inactive
- 1 = Transport Mode active