Audi A6 (4B) Heating/Air Conditioning (from MY 2002)

From Ross-Tech Wiki
Revision as of 09:02, 31 January 2008 by RtWiKiSyS0p (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Coding

  • 0?xxx: Heated Windshield
    • 0 = Heated Windshield not installed
    • 1 = Heated Windshield installed
  • 0x?xx: Compressor Type
    • 0 = Compressor with A/C Clutch (N25)
    • 1 = Compressor with A/C Compressor Regulator Valve (N280)
  • 0xx?x: Country
    • 0 = Rest of World (RoW)
    • 1 = Nort American Region (NAR)
    • 2 = Japan (JP)
  • 0xxx?: Vehicle & Engine
    • 0 = Gasoline Engine with Left-Hand-Drive (LHD)
    • 1 = Gasoline Engine with Right-Hand-Drive (RHD)
    • 3 = Diesel Engine with Left-Hand-Drive (LHD)
    • 4 = Diesel Engine with Right-Hand-Drive (RHD)


Basic Setting

Note: The basic setting needs to be performed, when the climatronic control module (J255) or a motor have been replaced.

[Select]
[08 - Heating/Air Conditioning]
[Basic Settings - 04]
Group 000
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The basic setting takes approximately 60 seconds.
[Done, Go Back]
[Close Controller, Go Back - 06]