Trailer Hitch Retrofitting (5N)
CAN-Gateway
[Select]
[19 - CAN-Gateway]
[Coding - 07]
[Long Coding Helper]
- Set Byte 03 Bit 6 = [69] Trailer active.
- Set Byte 03 Bit 6 = [69] Trailer active.
[Do It!]
[Close Controller, Go Back - 06]
Trailer Control Module
NOTE: This part varies depending on the type of the trailer control module. There are 2 variants available, those which are diagnostic capable and those who are not
Variant #1: Trailer Control Module (#69) NOT diagnostic capable
Nothing to do here, so leave it alone.
Variant #2: Trailer Control Module (#69) diagnostic capable
This control module requires a coding, see VAG-COM coding help or vehicle specific diagnostic procedures for details.
Parking Aid
This control module needs to be recoded, see VAG-COM coding help or vehicle specific diagnostic procedures for details.
Engine
Normally there is no activation of the trailer hitch in the ECU necessary, however the following engines require to be recoded: