Cruise Control Retrofitting (1K)
From Ross-Tech Wiki
Revision as of 12:39, 20 March 2009 by RtWiKiSyS0p (talk | contribs)
Requirements
Steering Column Control Module
There are 3 types of steering column control modules, each of them has 3 variants. The type is depending on the installed slip ring, either use the part number of the currently installed module or the part number of the slip ring to determine the correct module for the vehicle in question. If a part number is not listed, contact us and ask for help with this topic.
- Type I (Compatible to Slip Ring: 1K0-959-653, 1K0-959-653-A)
- Lowline
- Part Numbers: 1K0-953-549
- Supported Features: None
- Midline
- Part Numbers: 1K0-953-549-A
- Supported Features: Cruise Control, Trip Computer
- Highline
- Part Numbers: 1K0-953-549-B, 1K0-953-549-D, 1K0-953-549-AD, 1K0-953-549-AM
- Supported Features: Cruise Control, Trip Computer, Multi-Function Steering Wheel
- Lowline
- Type II (Compatible to Slip Ring: 1K0-959-653-C, 1K0-959-653-D)
- Lowline
- Part Numbers: 1K0-953-549-E, 1K0-953-549-AE, 1K0-953-549-BM
- Supported Features: None
- Midline
- Part Numbers: 1K0-953-549-F, 1K0-953-549-AF, 1K0-953-549-AH, 1K0-953-549-AP, 1K0-953-549-BC, 1K0-953-549-BF, 1K0-953-549-BN, 1K0-953-549-CA
- Supported Features: Cruise Control, Trip Computer
- Highline
- Part Numbers: 1K0-953-549-G, 1K0-953-549-AG, 1K0-953-549-AK, 1K0-953-549-AL, 1K0-953-549-AQ, 1K0-953-549-BD, 1K0-953-549-BK, 1K0-953-549-CC, 1K0-953-549-CD
- Supported Features: Cruise Control, Trip Computer, Multi-Function Steering Wheel
- Lowline
Note: 1K0-953-549-BC may have a Bug which doesn't allow Cruise Control Retrofitting, in such a Case you need to replace the Module.
- Type III (Compatible to Slip Ring: 1K0-959-654)
- Lowline
- Part Numbers:
- Supported Features: None
- Midline
- Part Numbers:
- Supported Features: Cruise Control, Trip Computer
- Highline
- Part Numbers: 1K0-953-549-CD, 1K0-953-549-CH
- Supported Features: Cruise Control, Trip Computer, Multi-Function Steering Wheel
- Lowline
Installation & Wiring
In general the whole retrofit is just plug and play except that one wire may need to be added.
- Wire T20d/13 from steering column control module to engine control module (see wiring diagram specific your particular car/engine).
- Install cruise control capable lever (see parts catalog/repair manual).
Activating Cruise Control
- Change Steering Column Control Module Coding.
- Activate Cruise Control in the Engine Control Module.
- See Engine specific Diagnostic Procedures, it's most likely a Coding or Coding-II involved.