VW Golf (1K) Comfort System
From Ross-Tech Wiki
Coding
Adaptation
Channel 000: Remote Control Clearing
[Select]
[46 - Central Conv.]
[Adaptation - 10]
Channel 000.
[Read]
To clear all matched remote controls press save.
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]
Channel 001: Remote Control Matching
[Select]
[46 - Central Conv]
[Adaptation - 10]
Channel 001.
[Read]
Note: The value does NOT show the actual number of adapted remotes.
- 0 = All memory positions occupied, matching of additionals keys not possible, clear memory positons first.
- 1 = Matching of additional remotes possible.
- Start matching new/additional remotes with entering "1" as new value.
[Test]
[Save]
Note: The time for matching remotes after saving the new value should not exceed 30 seconds. You can add a maximum of 4 remotes.
- Press the unlock button on each remote control you want to add, the blinkers will light up to confirm the adaptation process of each remote.
[Done, Go Back]
[Close Controller, Go Back - 06]
Special Procedures
Remote Control Synchronisation
- If locked, open the car using the drivers door lock.
- Press the remote control unlock button.
- Put the key in the ignition lock and switch on ignition.
- Switch off ignition and pull the key out of the ignition lock.
- Press the remote control lock or unlock button.
The synchronisation is now finished.