VW Golf (1K) Brake Electronics (MK60EC1)
Coding
Coding for this Control Module is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it's Coding to the new Module. In case this is not possible please contact us directly and we will assist you with the Coding Process.
Every inquiry on this topic has to include a full Auto-Scan as well as which parts have been replaced and why, also make sure the Auto-Scan includes the complete VIN of the vehicle in question.
Security Access
VCDS will provide this Information specific to the Control Module once you open the Security Access Function.
Basic Setting
Replacement
After Replacing this Control Module these Steps have to be performed:
- Code Brake Electronics (J104) Control Module
- Basic Setting for Steering Angle Sensor (G85)
- Basic Setting for Lateral Acceleration Sensor (G200)
- Basic Setting for Brake Pressure Sensor 1 (G201)
- Basic Setting for Longitudinal Acceleration Sensor (G202)
If the (old) Hydraulics Unit is still installed these Steps may have to be performed as well: