01299

From Ross-Tech Wiki

Revision as of 17:48, 17 June 2011 by Jef (talk | contribs) (Created page with '== 01299 - Diagnostic Interface for Data Bus (J533) == === 01299 - Diagnostic Interface for Data Bus (J533): No Communications === ==== Possible Symptoms ==== * Warning Lamp On…')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Table Of Contents

1. 01299 - Diagnostic Interface for Data Bus (J533)
- 1.1.1 01299 - Diagnostic Interface for Data Bus (J533): No Communications
  - 1.1.1.2 Possible Symptoms
  - 1.1.2.2 Possible Causes
  - 1.1.3.2 Possible Solutions
  - 1.1.4.2 Notes

01299 - Diagnostic Interface for Data Bus (J533)

01299 - Diagnostic Interface for Data Bus (J533): No Communications

Possible Symptoms

Warning Lamp On

Possible Causes

Wiring Harness Issue
Defective Control Module

Possible Solutions

Notes

If the fault is only found in one control module, then most likely that module is the issue. However, if the fault is found several different control modules, then the CAN Gateway could be the issue.

Retrieved from "https://wiki.ross-tech.com/wiki/index.php?title=01299&oldid=5900"