Audi A4 (8E) Automatic Roof

Adaptation

Channel 01: Reset

Prerequisites:

• Automatic Roof closed
• Measuring Value Blocks (MVB) OK

To reset the switch positions, save a new value of 1.

Special Notes

• If Adaptation will not set with only the 02000 fault present, check TSB 61-08-05 (2010940, NAR only)

Reading Roof Electronics Switch Conditions, Electric Power Top Closed

Measuring Block Group 001
Field 2								X	Field 3							Data
1	1	0	1	1	0	1	0		1	0	X	0	1	1	0	F201
																F290
																F293
																F200
																X
																Not used, always "0"
																F292
																X
																F171
																F202
																F294
																F295
																F172
																Switch Point for Bow UP
																Switch Point for Bow OPEN
																Switch Point for Bow DEAD CENTER