17090/P0706/001798
From Ross-Tech Wiki
Revision as of 12:01, 5 May 2014 by RtWiKiSyS0p (talk | contribs)
17090/P0706/001798 - Transmission Range Sensor (F125): Implausible Signal
Possible Symptoms
- No Reverse Lights
- Engine will not start
- Incorrect Gear Selection
- Gear Indicator Display (PRNDL) may be flashing
Possible Causes
- Gear Selector Cable incorrectly adjusted
- Transmission Range Sensor (F125) faulty
- Wiring and/or Connector(s) from/to Transmission Range Sensor (F125) faulty
Possible Solutions
- Adjust Gear Selector Cable
- Check Measuring Value Blocks (MVB)
- Check/Replace Transmission Range Sensor (F125)
- Check/Repair/Replace Wiring and/or Connector(s) from/to Transmission Range Sensor (F125)
Special Notes
- When found in 6-Speed Automatic Transmission (01J/Multitronic), the Transmission Range Sensor (F125) is part of the Transmission Control Module (J217)!
- Check Measuring Value Block (MVB) 002 for Plausibility
- Check all four Hall Sensor(s) / Magnets
- Check Selector Shaft Magnet(s) for Damage
- Check/Replace Transmission Control Module (J217)