00317
From Ross-Tech Wiki
00317 - Rear Lid Control Module (J605)
00317 - Rear Lid Control Module (J605): Electrical Fault in Circuit
00317 - Rear Lid Control Module (J605): Open Circuit
Possible Causes
- Wiring/Connectors from/to Rear Lid Control Module (J605)
- Internal electrical fault with Rear Lid Control Module (J605)
Possible Solutions
- Check/Repair Wiring/Connectors from/to Rear Lid Control Module (J605)
- Replace failed Rear Lid Control Module (J605)
00317 - Rear Lid Control Module (J605): Implausible Signal
Possible Causes
- Failed Rear Lid Control Module (J605)
Possible Solutions
- When found in 3C-Passat, replace Rear Lid Control Module (J605)
- Note: Damage to this controller/motor maybe due to an obstruction during the opening/closing operation of the rear lid.
- Important! - After replacing Rear Lid Control Module (J605), Adaptation must be performed.
- Rear lid is manually positioned in the halfway position, then both the outside and inside lid buttons are depressed at the same time. The lid will then move to the fully up position, adaptation is now complete, check clear codes.
- The 'Motor in rear lid control module (V375)' is part of the 'Rear Lid Control Module (J605)'