Audi A6 (4B) Level Control (2-Wheel)

From Ross-Tech Wiki
Revision as of 09:03, 7 August 2017 by Jef (talk | contribs) (→‎Basic Setting)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Adaptation

Basic Setting

See Level Control Bleeding/Charging for details on Basic Settings.

Suspension Level Control Calibration

Prerequisites:

  • Level Control Module (J197) OR Level Sensor (G84) OR Compressor (V66) replaced
  • Power Supply and Supply Voltage OK
  • Car has to sit on a lift.
  • Pre-Fill the system using Output Test.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=Audi_A6_(4B)_Level_Control_(2-Wheel)&oldid=8408"