Exhaust Gas Recirculation (EGR) Valve Adaptation

From Ross-Tech Wiki
Revision as of 10:41, 28 September 2022 by Peter (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Most VW/Audi/Seat/Skoda gasoline engines with Exhaust Gas Recirculation (EGR)

Prerequisites (General):

  • Ignition ON
  • Engine OFF
  • Battery voltage: 12.5 V or higher


[Select]
[01 - Engine]
[Meas. Blocks - 08]
Select Group 074.
[Go!]
MVB 074.1: Min Position in Volts
MVB 074.2: Max Position in Volts
MVB 074.3: Potentiometer voltage
MVB 074.4: Adaption status: (Run/OK/etc)
[Switch to Basic Settings]
MVB 074.4: Adaption status: (Run) then it should change to (ADP OK)
[Switch to Measuring Blocks]
[Close Controller, Go Back - 06]

Special Notes:

  • For ECU's using ME 7.5, the coolant temp needs to be between 10 and 50 °C.
  • In case the adaptation fails switch OFF the Ignition for 30 Seconds, then switch it ON and try again.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=Exhaust_Gas_Recirculation_(EGR)_Valve_Adaptation&oldid=9329"