C1011

From Ross-Tech Wiki
Revision as of 09:04, 24 October 2024 by Peter (talk | contribs) (Created page with "== C1011 - Brake Pad Replacement Mode Active == ==== Possible Symptoms ==== * Brake Change warning in Instrument Cluster * Parking Brake function is not available ==== Poss...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

C1011 - Brake Pad Replacement Mode Active

Possible Symptoms

  • Brake Change warning in Instrument Cluster
  • Parking Brake function is not available

Possible Causes

  • Brake Change Mode Active

Possible Solutions

  • Complete any repair work, use Basic Settings to "End lining change mode"

Special Notes

  • The LED in the Parking Brake Switch and the Warning Lamp in the Instrument Cluster will likely continue to flash, accompanied by Fault Code C1011, indicating that brake pad replacement mode is active.
  • This flashing warning should cease after completing the repair work and executing the Basic Settings for "End lining change mode." It may also be necessary to cycle the Parking Brake switch ON and then OFF while depressing the brake pedal