Difference between revisions of "00003"

From Ross-Tech Wiki
Line 39: Line 39:
 
* When found in [[Audi A3/S3 (8P)]]: [[Audi A3 (8P) Instrument Cluster|Instrument Cluster]]:
 
* When found in [[Audi A3/S3 (8P)]]: [[Audi A3 (8P) Instrument Cluster|Instrument Cluster]]:
 
** Check/Perform Instrument Cluster Service Interval Settings (Adaptation Channels 42, 43, 44, 45 and 49)
 
** Check/Perform Instrument Cluster Service Interval Settings (Adaptation Channels 42, 43, 44, 45 and 49)
 +
* When found in [[VW Golf (1K) Brake Electronics (MK60EC1)|Brake Electronics (MK60EC1)]]:
 +
** Replacing the Brake Electronics Control Module (J104) but keeping the (old) Hydraulics Unit will result in the Intake and Disconnecting Valves not being synchronized. A [[VW Golf (1K) Brake Electronics (MK60EC1)| Basic Setting for the Intake/Disconnecting Valves]] will solve this problem.
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 19:27, 16 February 2011

00003 - Control Module

00003 - Control Module: Defective

Possible Causes

  • Control Module faulty
  • Control Module Software Issue

Possible Solutions

  • Check Control Module
    • Check for Control Module Software Update
  • Replace Control Module

Special Notes

  • When found in Radio OR Radio Navigation System, check Measuring Value Block (MVB) 025.1 for Details.
    • Measuring Value Block 025.1 (MVB) may not be supported by all Radios OR Radio Navigation Systems.


00003 - Control Module: No or Incorrect Basic Setting / Adaptation

Possible Causes

  • Basic Setting(s) not performed

Possible Solutions

  • Perform Basic Setting(s)

Special Notes