Difference between revisions of "00515"

Revision as of 05:16, 9 August 2006

Some older engines store this code as long as the engine is not running, if in doubt read fault codes with the engine running again.

@@ Line 7: / Line 7: @@
 * Wiring to Camshaft Position (Hall) Sensor (G40) faulty
+* Camshaft Position (Hall) Sensor (G40) faulty
 ==== Possible Solutions ====
@@ Line 12: / Line 13: @@
 * Check Wiring to Camshaft Position (Hall) Sensor (G40)
 * Check/Replace Camshaft Position (Hall) Sensor (G40)
+* Check/Replace Engine Control Module
 ==== Special Notes ====
@@ Line 19: / Line 21: @@
 === 00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to B+ ===
+==== Possible Causes ====
+* Wiring to Camshaft Position (Hall) Sensor (G40) faulty
+* Camshaft Position (Hall) Sensor (G40) faulty
 ==== Possible Solutions ====
 * Check Wiring to Camshaft Position (Hall) Sensor (G40)
+* Check/Replace Camshaft Position (Hall) Sensor (G40)
+* Check/Replace Engine Control Module
 [[Category:Fault Codes]]