Difference between revisions of "00515"

From Ross-Tech Wiki
m
m
Line 20: Line 20:
  
  
=== 00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to B+ ===
+
=== 00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to Plus ===
  
 
==== Possible Causes ====
 
==== Possible Causes ====
Line 35: Line 35:
 
* Check Camshaft Timing
 
* Check Camshaft Timing
 
* Check/Replace Engine Control Module
 
* Check/Replace Engine Control Module
 +
 +
 +
=== 00515 - Camshaft Position (Hall) Sensor (G40): Short to Ground ===
 +
 +
==== Possible Symptoms ====
 +
 +
* Power Loss
 +
* Emissions not OK
 +
* High Fuel Consumption
 +
 +
==== Possible Causes ====
 +
 +
* Wiring to Camshaft Position (Hall) Sensor (G40) faulty
 +
* Camshaft Position (Hall) Sensor (G40) faulty
 +
 +
==== Possible Solutions ====
 +
 +
* Check Wiring to Camshaft Position (Hall) Sensor (G40)
 +
* Check/Replace Camshaft Position (Hall) Sensor (G40)
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 08:50, 13 February 2007

00515 - Camshaft Position (Hall) Sensor (G40)

00515 - Camshaft Position (Hall) Sensor (G40): No Signal

Possible Causes

  • Wiring to Camshaft Position (Hall) Sensor (G40) faulty
  • Camshaft Position (Hall) Sensor (G40) faulty

Possible Solutions

  • Check Wiring to Camshaft Position (Hall) Sensor (G40)
  • Check/Replace Camshaft Position (Hall) Sensor (G40)
  • Check/Replace Engine Control Module

Special Notes

  • Some older engines store this code as long as the engine is not running, if in doubt read fault codes with the engine running again.


00515 - Camshaft Position (Hall) Sensor (G40): Open or Short to Plus

Possible Causes

  • Wiring to Camshaft Position (Hall) Sensor (G40) faulty
  • Camshaft Position (Hall) Sensor (G40) Installation faulty
  • Camshaft Timing Out of Specification
  • Camshaft Position (Hall) Sensor (G40) faulty

Possible Solutions

  • Check Wiring to Camshaft Position (Hall) Sensor (G40)
  • Check/Replace Camshaft Position (Hall) Sensor (G40)
  • Check Camshaft Timing
  • Check/Replace Engine Control Module


00515 - Camshaft Position (Hall) Sensor (G40): Short to Ground

Possible Symptoms

  • Power Loss
  • Emissions not OK
  • High Fuel Consumption

Possible Causes

  • Wiring to Camshaft Position (Hall) Sensor (G40) faulty
  • Camshaft Position (Hall) Sensor (G40) faulty

Possible Solutions

  • Check Wiring to Camshaft Position (Hall) Sensor (G40)
  • Check/Replace Camshaft Position (Hall) Sensor (G40)