Difference between revisions of "01042"

From Ross-Tech Wiki
Line 22: Line 22:
 
* When found in[[VW Golf/Jetta/Bora (1K/5M)|VW Golf/Jetta/Bora (1K/5M and AJ)]]: [[VW Golf (1K) Headlight Aim Control (Xenon with AFS)|Headlight Aim Control (Xenon with AFS)]] perform [[VW Golf (1K) Headlight Aim Control (Xenon with AFS)#Coding|Coding]]
 
* When found in[[VW Golf/Jetta/Bora (1K/5M)|VW Golf/Jetta/Bora (1K/5M and AJ)]]: [[VW Golf (1K) Headlight Aim Control (Xenon with AFS)|Headlight Aim Control (Xenon with AFS)]] perform [[VW Golf (1K) Headlight Aim Control (Xenon with AFS)#Coding|Coding]]
 
* In certain cases this code may be stored even after properly coding a module (e.g. VW RNS510). In such cases make sure to use a proper workshop code (WSC), importer and device number. Those have to be non-0 values, so for example 12345-123-12345 should do it.
 
* In certain cases this code may be stored even after properly coding a module (e.g. VW RNS510). In such cases make sure to use a proper workshop code (WSC), importer and device number. Those have to be non-0 values, so for example 12345-123-12345 should do it.
 
+
* When found in Air Bag Control Modules, make sure the module is secured in place as per factory design (bolted down).
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 18:02, 14 October 2014

01042 - Control Module; Not Coded

Possible Symptoms

  • Malfunction Indicator Light (MIL) active

Possible Causes

  • Control Module not coded

Possible Solutions

  • Check Control Module Coding
    • Cross Reference Control Module Coding with related Control Modules (e.g. for Country or Powertrain Settings)

Special Notes