Difference between revisions of "01044"

Revision as of 19:57, 28 June 2007

When found in CAN-Gateway, use Gateway Installation List and check for unreachable or not registered control modules and update the Gateway Installation List by altering the Gateway Coding manually.

Some Passat (3B/B5) around MY 2000 have a Firmware Bug which causes this DTC to be set in the CAN Gateway (19). Service Documents for of those Cars indicate that this DTC should be ignored in that Module as long as the Coding matches the Vehicle Equipment.

Check/Fix Coding Pin/Bridge in Wiring
Check/Fix Control Module Coding
- See Vehicle Specific Diagnostic Procedures for Details

@@ Line 1: / Line 1: @@
 __FORCETOC__
+== 01044 - Control Module Incorrectly Coded ==
+==== Possible Symptoms ====
+* Reduced Functionality
+==== Possible Causes ====
+* Control Module incorrectly coded
+==== Possible Solutions ====
+* Check/Fix [http://www.ross-tech.com/vag-com/tour/recode_screen.html Control Module Coding]
+** See [[Diagnostic_Procedures|Vehicle Specific Diagnostic Procedures]] for Details
+==== Special Notes ====
+* When found in CAN-Gateway, use Gateway Installation List and check for unreachable or not registered control modules and update the Gateway Installation List by altering the Gateway Coding manually.
 == 01044 - Control Module Incorrectly Coded: Implausible Signal ==