Difference between revisions of "01087"

From Ross-Tech Wiki
m
 
 
(9 intermediate revisions by 3 users not shown)
Line 4: Line 4:
 
==== Possible Symptoms ====
 
==== Possible Symptoms ====
  
* Function Limitation<br>
+
* Malfunction Indicator Light (MIL) ON
 +
* Function Limitation
 +
* Control Module Coding not possible
  
 
==== Possible Causes ====
 
==== Possible Causes ====
  
* Basic Setting Not Performed<br>
+
* Basic Setting not performed
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
* Perform Basic Setting<br>
+
* Perform Basic Setting
 +
** Refer to [[Diagnostic Procedures]] and [[Official Factory Repair Information | Factory Repair Manual]] for Details.
  
 
==== Special Notes ====
 
==== Special Notes ====
  
* When found in [[VW_Passat_(3C)_Parking_Brake|Passat (3C): Parking Brake]], perform [[VW_Passat_(3C)_Parking_Brake#Function_Test|Function Test]].
+
*  When found in [[6-Speed_Direct_Shift_Gearbox_(DSG/02E) |6-Speed Direct Shift Gearbox (DSG/02E)]], perform [[6-Speed_Direct_Shift_Gearbox_(DSG/02E)#Basic_Setting | Basic Settings]].
 +
*  When found in [[Audi A5 (8T) Active Steering | Audi 1B-Active Steering (J792)]], perform [[Audi A5 (8T) Active Steering#Basic_Setting | Basic Settings]].
 +
* When found in [[Audi_A5_(8T)_Parking_Brake|Audi A4/S4/RS4/Cabriolet (8K): Parking Brake]], perform [[Audi_A5_(8T)_Parking_Brake#Function_Test|Function Test]].
 +
* When found in [[Audi_A6_(4F)_Parking_Brake|Audi A6 (4F): Parking Brake]], perform [[Audi_A6_(4F)_Parking_Brake#Function_Test|Function Test]].
 +
* When found in [[VW_Passat_(3C)_Parking_Brake|VW Passat (3C): Parking Brake]], perform [[VW_Passat_(3C)_Parking_Brake#Function_Test|Function Test]].
 +
** If the [[VW_Passat_(3C)_Parking_Brake#Function_Test|Function Test]] does not clear the code, perform [[VW Passat (3C) Brake Electronics#Longitudinal Acceleration Sensor (G251)|Longitudinal Acceleration Sensor (G251) Calibration]].
 +
 
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 10:11, 22 April 2015

01087 - Basic Setting Not Performed

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON
  • Function Limitation
  • Control Module Coding not possible

Possible Causes

  • Basic Setting not performed

Possible Solutions

Special Notes