Difference between revisions of "01273"
From Ross-Tech Wiki
| Line 16: | Line 16: | ||
* Check Control Module for Fresh Air Blower (J126) | * Check Control Module for Fresh Air Blower (J126) | ||
** Perform Output Test (Check Air Vents while Blower is active) | ** Perform Output Test (Check Air Vents while Blower is active) | ||
| − | * Check wiring | + | * Check wiring and connectors |
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 22:46, 31 August 2009
01273 - Fresh Air Blower (V2)
Possible Causes
- Fresh Air Blower (V2) defective
- Control Module for Fresh Air Blower (J126) defective
- Short of open circuit in wiring to Fresh Air Blower (V2)
- Climatronic Control Module (J255) malfunctioning
Possible Solutions
- Check Fresh Air Blower (V2)
- Perform Output Test (Check Air Vents while Blower is active)
- Check Meas. Blocks while Blower is active
- Check Control Module for Fresh Air Blower (J126)
- Perform Output Test (Check Air Vents while Blower is active)
- Check wiring and connectors