Difference between revisions of "01314"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| Line 8: | Line 8: | ||
* CAN-Databus Wiring/Connectors from/to Engine Control Module faulty | * CAN-Databus Wiring/Connectors from/to Engine Control Module faulty | ||
* Fault(s) stored in Engine Control Module | * Fault(s) stored in Engine Control Module | ||
| + | * Engine Control Module recently flashed or re-mapped | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
Revision as of 19:29, 21 July 2010
01314 - Engine Control Module
01314 - Engine Control Module: No Communications
Possible Causes
- CAN-Databus Wiring/Connectors from/to Engine Control Module faulty
- Fault(s) stored in Engine Control Module
- Engine Control Module recently flashed or re-mapped
Possible Solutions
- Check CAN-Databus Wiring/Connectors from/to Engine Control Module
- Check Measuring Value Blocks (MVB)
- Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status
01314 - Engine Control Module: Check DTC Memory
Possible Causes
- Fault(s) stored in Engine Control Module
Possible Solutions
- Check Engine Control Module for Fault Codes
Special Notes
- Engine Control Module stored a Code which influences other Control Modules Functionality.
- To clear this Fault Code you will need to correct the Problem in the Engine Control Module first.