Difference between revisions of "01318"

From Ross-Tech Wiki
m
Line 2: Line 2:
 
== 01318 - Control Module for Injection Pump (J399) ==
 
== 01318 - Control Module for Injection Pump (J399) ==
  
−
=== 01318 - Control Module for Injection Pump (J399): No Elaboration Available ===
+
=== 01318 - Control Module for Injection Pump (J399): No Communications ===
  
 
==== Possible Symptoms ====
 
==== Possible Symptoms ====

Revision as of 14:24, 28 April 2009

01318 - Control Module for Injection Pump (J399)

01318 - Control Module for Injection Pump (J399): No Communications

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Wiring and/or Connector(s) from/to Injection Pump (J399) faulty
  • Injection Pump (J399) faulty

Possible Solutions

  • Check Wiring and/or Connector(s) from/to Injection Pump (J399)
  • Check Communication to Injection Pump (J399)
    • See Measuring Value Block (MVB) 018
  • Check/Replace Injection Pump (J399)

Special Notes

  • When found on 2.5l V6 TDI, has a Compression Test been performed? This code may be stored in Combination with a Compression Test even though the Communication is OK. Under these Circumstances this Fault Code should be cleared.


01318 - Control Module for Injection Pump (J399): No Elaboration Available

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Control Module Software Issue

Special Notes

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=01318&oldid=4726"