Difference between revisions of "01321"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
|||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 12: | Line 12: | ||
* When found in [[Audi A4 (8E) Brake Electronics (Bosch 8.0)|Audi A4 (8E): Brake Electronics (Bosch 8.0)]] | * When found in [[Audi A4 (8E) Brake Electronics (Bosch 8.0)|Audi A4 (8E): Brake Electronics (Bosch 8.0)]] | ||
** Coding of Powertrain Control Modules wrong/incomplete | ** Coding of Powertrain Control Modules wrong/incomplete | ||
| + | |||
| + | * When found in [[Audi A8 (4E) Parking Brake]] | ||
| + | ** Check Airbag Control Module for DTCs. DTC [[00591]] can cause this. | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
* When found in [[Audi A4 (8E) Brake Electronics (Bosch 8.0)|Audi A4 (8E): Brake Electronics (Bosch 8.0)]] | * When found in [[Audi A4 (8E) Brake Electronics (Bosch 8.0)|Audi A4 (8E): Brake Electronics (Bosch 8.0)]] | ||
| − | ** Check Coding of Powertrain Control Modules | + | ** Check Coding of Powertrain Control Modules, especially check the related [[Audi A4 (8E) Airbag 9.41#Adaptation|Airbag 9.41 Adaptation Channels 050 & 051]]. |
| − | + | ||
| + | * When found in [[Audi A8 (4E) Parking Brake]] | ||
| + | ** Resolve any faults codes in the Air Bag Module | ||
| + | |||
| + | === 01321 - Control Module for Airbags (J234): No Signal/Communication === | ||
| + | |||
| + | ==== Possible Symptoms ==== | ||
| + | |||
| + | * Malfunction Indicator Light (MIL) ON | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * CAN-Databus Wiring/Connectors from/to Airbag Control Module (J234) faulty | ||
| + | * Fault(s) stored in Airbag Control Module (J234) | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Check CAN-Databus Wiring/Connectors from/to Airbag Control Module (J234) | ||
| + | * Check Measuring Value Blocks (MVB) | ||
| + | ** Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 12:24, 10 November 2011
01321 - Control Module for Airbags (J234)
01321 - Control Module for Airbags (J234)
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- When found in Audi A4 (8E): Brake Electronics (Bosch 8.0)
- Coding of Powertrain Control Modules wrong/incomplete
- When found in Audi A8 (4E) Parking Brake
- Check Airbag Control Module for DTCs. DTC 00591 can cause this.
Possible Solutions
- When found in Audi A4 (8E): Brake Electronics (Bosch 8.0)
- Check Coding of Powertrain Control Modules, especially check the related Airbag 9.41 Adaptation Channels 050 & 051.
- When found in Audi A8 (4E) Parking Brake
- Resolve any faults codes in the Air Bag Module
01321 - Control Module for Airbags (J234): No Signal/Communication
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- CAN-Databus Wiring/Connectors from/to Airbag Control Module (J234) faulty
- Fault(s) stored in Airbag Control Module (J234)
Possible Solutions
- Check CAN-Databus Wiring/Connectors from/to Airbag Control Module (J234)
- Check Measuring Value Blocks (MVB)
- Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status