Difference between revisions of "01435"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) |
||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
== 01435 - Brake Pressure Sensor 1 (G201) == | == 01435 - Brake Pressure Sensor 1 (G201) == | ||
| + | |||
| + | === 01435 - Brake Pressure Sensor 1 (G201): No or Incorrect Basic Setting / Adaptation === | ||
| + | |||
| + | ==== Possible Symptoms ==== | ||
| + | |||
| + | * Malfunction Indicator Light (MIL) active | ||
| + | |||
| + | ==== Possible Causes ==== | ||
| + | |||
| + | * Basic Setting not performed | ||
| + | |||
| + | ==== Possible Solutions ==== | ||
| + | |||
| + | * Perform Basic Setting | ||
| + | |||
=== 01435 - Brake Pressure Sensor 1 (G201): Electrical Fault in Circuit === | === 01435 - Brake Pressure Sensor 1 (G201): Electrical Fault in Circuit === | ||
Revision as of 13:48, 10 November 2007
01435 - Brake Pressure Sensor 1 (G201)
01435 - Brake Pressure Sensor 1 (G201): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Basic Setting not performed
Possible Solutions
- Perform Basic Setting
01435 - Brake Pressure Sensor 1 (G201): Electrical Fault in Circuit
Possible Causes
- Brake Pedal Switch (F) faulty/jammed
- Brake Pressure Sensor 1 (G201) faulty
Possible Solutions
- Check/Replace Brake Pedal Switch (F)
- See Measuring Blocks
- Check/Replace Brake Pressure Sensor 1 (G201)
- ABS Hydraulic Unit (N55) may need to replaced
- Perform Brake Pump Bleeding
- Perform Brake Pressure Sensor 1 (G201) Basic Setting
- Replace Brake Electronics Control Module (J104)