Difference between revisions of "01435"

From Ross-Tech Wiki
m
Line 1: Line 1:
__FORCETOC__
 
== 01435 - Brake Pressure Sensor 1 (G201) ==
 
 
=== 01435 - Brake Pressure Sensor 1 (G201): No or Incorrect Basic Setting / Adaptation ===
 
 
==== Possible Symptoms ====
 
 
* Malfunction Indicator Light (MIL) active
 
 
==== Possible Causes ====
 
 
* Basic Setting not performed
 
 
==== Possible Solutions ====
 
 
* Perform Basic Setting
 
 
 
=== 01435 - Brake Pressure Sensor 1 (G201): Electrical Fault in  Circuit ===
 
 
==== Possible Causes ====
 
 
* Brake Pedal Switch (F) faulty/jammed
 
* Brake Pressure Sensor 1  (G201) faulty
 
 
==== Possible Solutions ====
 
 
* Check/Replace Brake Pedal Switch (F)
 
** See Measuring Blocks
 
* Check/Replace Brake Pressure Sensor 1 (G201)
 
** ABS Hydraulic Unit (N55) may need to replaced
 
** Perform Brake Pump Bleeding
 
** Perform Brake Pressure Sensor 1 (G201) Basic Setting
 
** Replace Brake Electronics Control Module (J104)
 
 
==== Special Notes ====
 
 
* When found in MK60 ABS/ESP Brake Systems:
 
** Check if the Repair Kit documented in TPI 2024465 ([http://erwin.volkswagen.de RoW VW]), 2025290 ([http://erwin.volkswagen.de RoW VW Commercial]) or 2025633 ([http://erwin.audi.de RoW Audi]) with the Part Number 1K0-698-517-B is compatible, using the Repair Kit allows to replace the Hydraulic Unit (N55) and the Brake Pressure Sensor 1 (G201) separate from the Control Module which will reduce the Repair Costs.
 
 
 
=== 01435 - Brake Pressure Sensor 1 (G201): Implausible Signal ===
 
 
==== Possible Symptoms ====
 
 
* Malfunction Indicator Light (MIL) active
 
 
==== Possible Causes ====
 
 
* Brake Pedal Switch (F) faulty/jammed
 
* Brake Pressure Sensor 1 (G201) faulty
 
 
==== Possible Solutions ====
 
 
* Check/Replace Brake Pedal Switch (F)
 
** See Measuring Value Blocks (MVB)
 
* Check Brake Pressure Sensor 1 (G201)
 
** See Measuring Value Blocks (MVB)
 
* Check/Replace Brake Electronics Control Module (J104) and/or ABS Hydraulic Unit (N55)
 
 
 
==== Special Notes ====
 
==== Special Notes ====
  
* When found in Bosch ESP Brake Systems:
+
* When found in '''RoW''' (Rest of World) '''MK60''' ABS/ESP Brake Systems check to see if the Repair Kit documented in the following TPIs is compatible:
** The Bosh 5.x ABS modules drop communication at road speeds which makes it difficult, if not impossible, to log live measuring block data. If the Brake Light Switch is suspected as faulty and causing a G201 fault:
+
**'''VW''' TPI 2024465 ([http://erwin.volkswagen.de RoW VW]), 2025290 ([http://erwin.volkswagen.de RoW VW Commercial])
*** Try logging the Engine or Transmission for brake light switching.
+
**'''Audi''' TPI 2025633 ([http://erwin.audi.de RoW Audi])
*** Drive with the Cruise Control on and see if the system works as per design. If the CCS will not operate or the CCS does not shut off when the brakes are applied the Brake Light Switch may be faulty.
+
**'''Seat''' TPI 2024720 ([http://erwin.seat.com/erWin Seat])
 +
**'''Skoda''' TPI 2025844 ([http://erwin.skoda-auto.cz Skoda]) ''or the previous RoW TPI 2025663''
  
[[Category:Fault Codes]]
+
If Part Number 1K0-698-517-B is compatible, using the Repair Kit allows to replace the Hydraulic Control Unit (HCU) ''(which contains the (N55) Hydraulic Unit and (G201) the Brake Pressure Sensor 1)'' separate from the Control Module which will reduce the Repair Costs.

Revision as of 11:50, 19 February 2015

Special Notes

  • When found in RoW (Rest of World) MK60 ABS/ESP Brake Systems check to see if the Repair Kit documented in the following TPIs is compatible:

If Part Number 1K0-698-517-B is compatible, using the Repair Kit allows to replace the Hydraulic Control Unit (HCU) (which contains the (N55) Hydraulic Unit and (G201) the Brake Pressure Sensor 1) separate from the Control Module which will reduce the Repair Costs.