01560

From Ross-Tech Wiki
Revision as of 05:49, 14 June 2007 by RtWiKiSyS0p (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

01560 - Passenger Door

01560 - Passenger Door: Won't De-Safe

Possible Causes

  • Wiring/Connector from/to Central Locking Actuator (Safe): Passenger Door (F221) faulty
  • Central Locking Actuator (Safe): Passenger Door (F221) faulty

Possible Solutions

  • Check Wiring/Connector from/to Central Locking Actuator (Safe): Passenger Door (F221)
  • Check Central Locking Actuator (Safe): Passenger Door (F221)
    • See Measuring Blocks OR perform Output Test

Special Notes

  • Safe states can normally only be checked while the car is being locked with ignition off, however usually the comfort system/central locking allows you to diagnose problems even with ignition off, as long as the diagnostic communication has been initiated before the ignition is being switched off. In detail this means switch on the ignition, connect to the comfort system/central locking and open the desired measuring block. Keep the measuring block running, switch off the ignition and lock the car. Finally when unlocking check if the actuator status changes as expected.