Difference between revisions of "01794"

From Ross-Tech Wiki
m
Line 22: Line 22:
 
* When found in [[Audi A4/S4/RS4/Cabriolet (8E/8H)]] (if the above Procedures do not succeed):
 
* When found in [[Audi A4/S4/RS4/Cabriolet (8E/8H)]] (if the above Procedures do not succeed):
 
** When the Vehicle Identification Number (VIN) in Instrument Cluster does NOT match the real one, the VIN stored in the Instrument Clusters might be lost or corrupted. This problem can usually only be resolved by installing a new Instrument Cluster or finding somebody who is able to repair the old one. Additional detailes describing this problem can be found in TPI 2004680.
 
** When the Vehicle Identification Number (VIN) in Instrument Cluster does NOT match the real one, the VIN stored in the Instrument Clusters might be lost or corrupted. This problem can usually only be resolved by installing a new Instrument Cluster or finding somebody who is able to repair the old one. Additional detailes describing this problem can be found in TPI 2004680.
** When all Vehicle Identification Number (VIN) data is correct but the Airbag Control Module (J234) still shows this error, please check TPI 2007313. If the circumstances match this fault code may be ignored.
 
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 09:45, 23 February 2010

01794 - Control Module: Incorrect Chassis (VIN) Number

Possible Causes

  • Control Module was never adapted to a Car (New Control Module)
  • Control Module was originally adapted to a different Car (Used Control Module)

Possible Solutions

  • Check Vehicle Identification Number (VIN) of Control Module and Car
    • Perform Vehicle Data Learning

Special Notes