Difference between revisions of "02214"

From Ross-Tech Wiki
m
m
Line 16: Line 16:
 
* When found in [[Seat Exeo (3R)]]: Tire Pressure Monitoring II, perform System Reset.
 
* When found in [[Seat Exeo (3R)]]: Tire Pressure Monitoring II, perform System Reset.
 
** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
 
** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration.
 +
** Clear/check Fault Codes.
 
** Switch the Ignition OFF.
 
** Switch the Ignition OFF.
** Clear/check Fault Codes and check/correct the Tire Pressure.
+
** Check/correct the Tire Pressure.
 
** Switch the Ignition ON.
 
** Switch the Ignition ON.
 
** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster briefly lights up.
 
** Press/Hold the Tire Pressure Monitoring Button (E226) for at least 5 Seconds to Reset the Calibration again until the Tire Pressure Monitoring Lamp in the Instrument Cluster briefly lights up.

Revision as of 10:08, 18 March 2013

02214 - Tire Pressure Warning

02214 - Tire Pressure Warning: Defective

Possible Symptoms

  • Tire Pressure Monitoring not working

Possible Solutions

  • Reset Tire Pressure Monitoring

Special Notes