Difference between revisions of "02432"

From Ross-Tech Wiki
m
Line 24: Line 24:
  
 
* Make sure to cycle the Parking Brake a couple of times between checking for Fault Codes, this will ensure that the Control Module tests the related Components again.
 
* Make sure to cycle the Parking Brake a couple of times between checking for Fault Codes, this will ensure that the Control Module tests the related Components again.
 +
* When found in [[VW Passat (3C)]]: Parking Brake Electronics, check TSB 01-07-47 (2015075, NAR only) or TPI 2013530 (RoW) for possible Control Module Software Update which corrects Low Voltage Sensitivity.
  
* When this fault is found in the 3C Passat with either 3C0 907 801 B or 3C0 907 801 E modules refer to TSB 01 07 47.
 
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 00:41, 13 October 2009

02432 - Supply Voltage for Left Parking Brake Motor (V282)

02432 - Supply Voltage for Left Parking Brake Motor (V282): Electrical Fault in Circuit

02432 - Supply Voltage for Left Parking Brake Motor (V282): Open Circuit

Possible Symptoms

  • Parking Brake Warning Light active/flashing

Possible Causes

  • Wiring/Connectors from/to Left Parking Brake Motor (V282) faulty
  • Left Parking Brake Motor (V282) Power Supply faulty

Possible Solutions

  • Check Wiring/Connectors from/to Left Parking Brake Motor (V282)
  • Check Left Parking Brake Motor (V282) Power Supply
  • Perform Terminal 30 Reset
    • Remove Fuse(s) for a short Time.

Special Notes

  • Make sure to cycle the Parking Brake a couple of times between checking for Fault Codes, this will ensure that the Control Module tests the related Components again.
  • When found in VW Passat (3C): Parking Brake Electronics, check TSB 01-07-47 (2015075, NAR only) or TPI 2013530 (RoW) for possible Control Module Software Update which corrects Low Voltage Sensitivity.