Difference between revisions of "02432"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| Line 13: | Line 13: | ||
* Wiring/Connectors from/to Left Parking Brake Motor (V282) faulty | * Wiring/Connectors from/to Left Parking Brake Motor (V282) faulty | ||
* Left Parking Brake Motor (V282) Power Supply faulty | * Left Parking Brake Motor (V282) Power Supply faulty | ||
| + | * Left Parking Brake Motor/Caliper (V282) faulty | ||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
* Check Wiring/Connectors from/to Left Parking Brake Motor (V282) | * Check Wiring/Connectors from/to Left Parking Brake Motor (V282) | ||
| − | * Check Left Parking Brake Motor (V282) Power Supply | + | * Check Left Parking Brake Motor and (V282) Power Supply |
* Perform Terminal 30 Reset | * Perform Terminal 30 Reset | ||
** Remove Fuse(s) for a short Time. | ** Remove Fuse(s) for a short Time. | ||
| Line 25: | Line 26: | ||
* Make sure to cycle the Parking Brake a couple of times between checking for Fault Codes, this will ensure that the Control Module tests the related Components again. | * Make sure to cycle the Parking Brake a couple of times between checking for Fault Codes, this will ensure that the Control Module tests the related Components again. | ||
* When found in [[VW Passat (3C)]]: Parking Brake Electronics, check TSB 01-07-47 (2015075, NAR only) or TPI 2013530 (RoW) for possible Control Module Software Update which corrects Low Voltage Sensitivity. | * When found in [[VW Passat (3C)]]: Parking Brake Electronics, check TSB 01-07-47 (2015075, NAR only) or TPI 2013530 (RoW) for possible Control Module Software Update which corrects Low Voltage Sensitivity. | ||
| + | * When checking voltage with this fault code stored, the module may not output power to the motor. Try clearing fault codes and operating the EPB as mentioned above and retesting. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 17:28, 28 March 2011
02432 - Supply Voltage for Left Parking Brake Motor (V282)
02432 - Supply Voltage for Left Parking Brake Motor (V282): Electrical Fault in Circuit
02432 - Supply Voltage for Left Parking Brake Motor (V282): Open Circuit
Possible Symptoms
- Parking Brake Warning Light active/flashing
Possible Causes
- Wiring/Connectors from/to Left Parking Brake Motor (V282) faulty
- Left Parking Brake Motor (V282) Power Supply faulty
- Left Parking Brake Motor/Caliper (V282) faulty
Possible Solutions
- Check Wiring/Connectors from/to Left Parking Brake Motor (V282)
- Check Left Parking Brake Motor and (V282) Power Supply
- Perform Terminal 30 Reset
- Remove Fuse(s) for a short Time.
Special Notes
- Make sure to cycle the Parking Brake a couple of times between checking for Fault Codes, this will ensure that the Control Module tests the related Components again.
- When found in VW Passat (3C): Parking Brake Electronics, check TSB 01-07-47 (2015075, NAR only) or TPI 2013530 (RoW) for possible Control Module Software Update which corrects Low Voltage Sensitivity.
- When checking voltage with this fault code stored, the module may not output power to the motor. Try clearing fault codes and operating the EPB as mentioned above and retesting.