Difference between revisions of "02656"

From Ross-Tech Wiki
m
Line 17: Line 17:
 
==== Special Notes ====
 
==== Special Notes ====
  
 +
* In case an Output Stage is being replaced, the Subsystem/Slave often cannot be coded directly. Instead recode the Headlight Aim Control Module with the proper/current Coding, this will also code the Subsystems/Slaves.
 
* When found in [[Audi A8/S8 (4E)]]: [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)|Headlight Aim Control (Adaptive Light)]], perform [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)#Coding|Coding]].
 
* When found in [[Audi A8/S8 (4E)]]: [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)|Headlight Aim Control (Adaptive Light)]], perform [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)#Coding|Coding]].
 
* When found in [[VW Passat (3C)]]: [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)|Headlight Aim Control]], perform [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)#Coding|Coding]].
 
* When found in [[VW Passat (3C)]]: [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)|Headlight Aim Control]], perform [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)#Coding|Coding]].
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 10:42, 2 February 2011

02656 - Power Output Stage for Left Headlight (J667); Not Coded

Possible Symptoms

  • Malfunction Indicator Light (MIL) active

Possible Causes

  • Control Module or if Subsystem, Master not coded

Possible Solutions

  • Check Control Module Coding
    • Cross Reference Control Module Coding with related Control Modules (e.g. for Country or Powertrain Settings)

Special Notes