Difference between revisions of "02811"

From Ross-Tech Wiki
(New page: __FORCETOC__ == 02811 - Electronic Steering Column Lock Control Module (J764) == === 02811 - Electronic Steering Column Lock Control Module (J764): Faulty === ==== Possible Symptoms ====...)
 
Line 12: Line 12:
  
 
* Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9) faulty
 
* Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9) faulty
* Electronic Ignition Lock (D9) faulty  
+
* Electronic Steering Column Lock Control Module (J764) faulty  
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
 
* Check Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9)
 
* Check Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9)
* Check/Replace Electronic Ignition Lock (D9)
+
* Check/Replace Electronic Steering Column Lock Control Module (J764)
 +
 
 +
==== Special Notes ====
 +
 
 +
* When found in VW Passat (3C), the Electronic Steering Column Lock Control Module (J764) cannot be replaced individually and the entire Steering Column need to be replaced as well. If the Steering Column needs to be replaced the Comfort Control Module (J393) needs to be replaced too since it houses the Immobilizer related Functions. See TPI 2018893 for further details.
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 07:18, 16 July 2009

02811 - Electronic Steering Column Lock Control Module (J764)

02811 - Electronic Steering Column Lock Control Module (J764): Faulty

Possible Symptoms

  • Electronic Steering Column Lock not working
  • Engine not starting

Possible Causes

  • Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9) faulty
  • Electronic Steering Column Lock Control Module (J764) faulty

Possible Solutions

  • Check Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9)
  • Check/Replace Electronic Steering Column Lock Control Module (J764)

Special Notes

  • When found in VW Passat (3C), the Electronic Steering Column Lock Control Module (J764) cannot be replaced individually and the entire Steering Column need to be replaced as well. If the Steering Column needs to be replaced the Comfort Control Module (J393) needs to be replaced too since it houses the Immobilizer related Functions. See TPI 2018893 for further details.