Difference between revisions of "02861"

From Ross-Tech Wiki
Line 21: Line 21:
 
==== Special Notes ====
 
==== Special Notes ====
  
* When found in VW Passat (3C), the Electronic Steering Column Lock Control Module (J764) cannot be replaced individually and the entire Steering Column need to be replaced as well. If the Steering Column needs to be replaced the Comfort Control Module (J393) needs to be replaced too since it houses the Immobilizer related Functions. See TPI 2018893 for further details.
+
* When found in the VW Passat (3C), the Electronic Steering Column Lock can now be replaced independently from the entire steering column. It should not be necessary to replace the entire column when replacing the ESCL (J764)
 
+
** The Comfort Control Module (J393) houses the Immobilizer related Functions.  Depending on the  Comfort Control Module, it might be possible to reprogram it as opposed to replacing it with the ESCL replacement.
* When found in the NAR (North American Region) VW Passat (3C), the Electronic Steering Column Lock can now be replaced independently from the entire steering column. It should not be necessary to replace the comfort module or the entire column when replacing the ESCL (J764) .  
 
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 23:18, 3 September 2010

02861 - Electronic Steering Column Lock

02861 - Electronic Steering Column Lock: Implausible Signal

Possible Symptoms

  • Electronic Steering Column Lock not working
  • Engine not starting

Possible Causes

  • Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9) faulty
  • Electronic Steering Column Lock Control Module (J764) faulty

Possible Solutions

  • Check Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9)
  • Check/Replace Electronic Steering Column Lock Control Module (J764)

Special Notes

  • When found in the VW Passat (3C), the Electronic Steering Column Lock can now be replaced independently from the entire steering column. It should not be necessary to replace the entire column when replacing the ESCL (J764).
    • The Comfort Control Module (J393) houses the Immobilizer related Functions. Depending on the Comfort Control Module, it might be possible to reprogram it as opposed to replacing it with the ESCL replacement.