Difference between revisions of "03396"
From Ross-Tech Wiki
(Created page with "== 03396 - Supply voltage terminal 30 for central locking: Open Circuit == ==== Special Notes ==== * When found in Mk6 Golf (PQ35) based models using a VW Golf (5K) Body...") |
|||
| Line 4: | Line 4: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
* When found in Mk6 Golf (PQ35) based models using a [[VW Golf (5K) Body Control Module | 09-Cent. Elect./BCM (J519)]] module that contains Component: '''PQ35''' check the fuse that powers terminal T52b/1 at J519. If the fuse is blown or Terminal 30 power is not getting to T52b/1 the vehicle will have this DTC in addition to inoperative Rear wiper, Dual washer pump, Fuel Tank Flap and Central Locking for boot. | * When found in Mk6 Golf (PQ35) based models using a [[VW Golf (5K) Body Control Module | 09-Cent. Elect./BCM (J519)]] module that contains Component: '''PQ35''' check the fuse that powers terminal T52b/1 at J519. If the fuse is blown or Terminal 30 power is not getting to T52b/1 the vehicle will have this DTC in addition to inoperative Rear wiper, Dual washer pump, Fuel Tank Flap and Central Locking for boot. | ||
| + | ** Check the Comfort system wiring diagram for that terminal at J519 instead of the Standard equipment diagram since it is "comfort" function specific. | ||
** Wiring diagrams can be obtained from erWin directly: [[Official Factory Repair Information]]. | ** Wiring diagrams can be obtained from erWin directly: [[Official Factory Repair Information]]. | ||
Latest revision as of 16:14, 12 February 2021
03396 - Supply voltage terminal 30 for central locking: Open Circuit
Special Notes
- When found in Mk6 Golf (PQ35) based models using a 09-Cent. Elect./BCM (J519) module that contains Component: PQ35 check the fuse that powers terminal T52b/1 at J519. If the fuse is blown or Terminal 30 power is not getting to T52b/1 the vehicle will have this DTC in addition to inoperative Rear wiper, Dual washer pump, Fuel Tank Flap and Central Locking for boot.
- Check the Comfort system wiring diagram for that terminal at J519 instead of the Standard equipment diagram since it is "comfort" function specific.
- Wiring diagrams can be obtained from erWin directly: Official Factory Repair Information.