Difference between revisions of "16347"

From Ross-Tech Wiki
(Created page with '__FORCETOC__ == 16347 - Control Module - EEPROM Error == ==== Possible Symptoms ==== * Control Module doesn't perform to factory design ==== Possible Causes ==== * Wrong Fir…')
 
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
  
== 16347 - Control Module - EEPROM Error ==
+
== 16347 - Control Module faulty/defective (EEPROM Error) ==
  
 
==== Possible Symptoms ====
 
==== Possible Symptoms ====
  
* Control Module doesn't perform to factory design
+
* Unexpected Malfunctions
  
 
==== Possible Causes ====
 
==== Possible Causes ====
  
* Wrong Firmware Installed
+
* Control Module faulty
* Failed Control Module
+
* Incorrect Firmware Installed
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
* Update Firmware of Control Moudle
+
* Check/Update Control Module Firmware
* Replaced Control Module
+
* Check/Replace Control Module
  
 
==== Special Notes ====
 
==== Special Notes ====
Line 21: Line 21:
 
* When found on:
 
* When found on:
 
** VW ABS modules, see TPI 2017922
 
** VW ABS modules, see TPI 2017922
 +
** VW 2010 - 2012 Power Steering Control Module, see TPI 2030353
 +
*** https://static.nhtsa.gov/odi/tsbs/2013/SB-10052042-9820.pdf  NHTSA
 
** Bosch 8.0 ABS module, see TPI 2008907
 
** Bosch 8.0 ABS module, see TPI 2008907
 
** Skoda with Bosch 8.0 ABS modules, see TPI 2014687
 
** Skoda with Bosch 8.0 ABS modules, see TPI 2014687
 
** Audi A3 or TT Steering Assist, see TPI 2021189
 
** Audi A3 or TT Steering Assist, see TPI 2021189
 +
*** https://static.nhtsa.gov/odi/tsbs/2015/SB-10057683-7066.pdf  NHTSA
 
** Audi A8 Electronic Parking Brake, see TPI 2016072
 
** Audi A8 Electronic Parking Brake, see TPI 2016072
 
 
 
 
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 10:45, 3 March 2021


16347 - Control Module faulty/defective (EEPROM Error)

Possible Symptoms

  • Unexpected Malfunctions

Possible Causes

  • Control Module faulty
  • Incorrect Firmware Installed

Possible Solutions

  • Check/Update Control Module Firmware
  • Check/Replace Control Module

Special Notes