Difference between revisions of "16452/P0068/000104"

From Ross-Tech Wiki
 
(3 intermediate revisions by 2 users not shown)
Line 9: Line 9:
  
 
* Mass Air Flow Sensor (G70/MAF) or Intake Manifold Pressure Sensor (G71/MAP) faulty
 
* Mass Air Flow Sensor (G70/MAF) or Intake Manifold Pressure Sensor (G71/MAP) faulty
* Dirty throttle body.
+
* Dirty or faulty throttle body.
 +
* Vacuum leak.
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
 
* Check Mass Air Flow Sensor (G70/MAF) or Intake Manifold Pressure Sensor (G71/MAP)
 
* Check Mass Air Flow Sensor (G70/MAF) or Intake Manifold Pressure Sensor (G71/MAP)
* Clean Throttle Body and performed Throttle Body adaption.
+
* Clean Throttle Body and perform [[Throttle Body Alignment (TBA)]].
 +
* Check intake system for leaks and un-metered air.
 +
** This includes Intake Manifold Runner(s) and Intake Manifold Runner position sensor(s) when applicable.
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 17:20, 14 December 2017

16452/P0068/000104 - MAP/MAF <-> Throttle Position Correlation

Possible Symptoms

  • Malfunction Indicator Lamp (MIL) active

Possible Causes

  • Mass Air Flow Sensor (G70/MAF) or Intake Manifold Pressure Sensor (G71/MAP) faulty
  • Dirty or faulty throttle body.
  • Vacuum leak.

Possible Solutions

  • Check Mass Air Flow Sensor (G70/MAF) or Intake Manifold Pressure Sensor (G71/MAP)
  • Clean Throttle Body and perform Throttle Body Alignment (TBA).
  • Check intake system for leaks and un-metered air.
    • This includes Intake Manifold Runner(s) and Intake Manifold Runner position sensor(s) when applicable.