Difference between revisions of "16718/P0334/000820"

From Ross-Tech Wiki
 
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
== 16716/P0332 - Knock Sensor 2 (G66): Signal too Low ==
+
== 16718/P0334 - Knock Sensor 2 (G66): Intermittent ==
  
 
==== Possible Symptoms ====
 
==== Possible Symptoms ====
Line 12: Line 12:
  
 
* Circuit G66 short to Ground
 
* Circuit G66 short to Ground
 +
* Circuit G66 short to Power
 
* Circuit G66 open
 
* Circuit G66 open
 
* G66 loose
 
* G66 loose
Line 27: Line 28:
 
* This feature search for unusual (spontaneous) combustion. The sensor detects unusual vibrations and based on that it generates a voltage. Is this voltage outside a certain limit a dtc will be set.
 
* This feature search for unusual (spontaneous) combustion. The sensor detects unusual vibrations and based on that it generates a voltage. Is this voltage outside a certain limit a dtc will be set.
  
--[[User:Gerrit Speek|Gerrit Speek]] 14:49, 11 June 2006 (Central European Time)
+
--[[User:Gerrit Speek|Gerrit Speek]] 15:14, 11 June 2006 (Central European Time)
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 09:15, 11 June 2006

16718/P0334 - Knock Sensor 2 (G66): Intermittent

Possible Symptoms

  • Irregular rpm
  • Drivebility problems
  • Loss of power
  • Engine damage

Possible Causes

  • Circuit G66 short to Ground
  • Circuit G66 short to Power
  • Circuit G66 open
  • G66 loose
  • G66 damaged
  • Control Module damaged

Solutions

  • Tighten Knock Sensor 2 (G66)
  • Check wiring and connections
  • Check Knock Sensor 2 (G62) and Knock Control

Special Notes

  • This feature search for unusual (spontaneous) combustion. The sensor detects unusual vibrations and based on that it generates a voltage. Is this voltage outside a certain limit a dtc will be set.

--Gerrit Speek 15:14, 11 June 2006 (Central European Time)